When a construction project reaches practical completion in Kenya, whether it is an executive corporate park in Westlands, an apartment tower in Kilimani, or a private residence in Karen, the gap between "builders finished" and "ready for occupancy" is enormous. Construction dust, alkaline concrete haze, adhesive overspray, and paint spatters embed themselves into every porous texture.
Critical Developer Takeaway
Standard domestic cleaners or general site laborers lack the rotary floor polishers, industrial HEPA extraction machines, and neutral-pH chemical descalers required to clean new builds without scratching tempered glass or permanently etching delicate tiles.
01. Phase One: The Rough Cleaning (Post-Subcontractor)
Rough cleaning begins immediately after masonry, carpentry, electrical, and plumbing rough-ins conclude. At this stage, the objective is removing bulk hazards and mass debris so fine fixtures can be installed safely:
- Masonry & Wood Off-Cut Clearance: Removal of broken tile fragments, drywall trimmings, lumber off-cuts, and metal shavings from corridors and utility rooms.
- Bulk Vacuuming: Heavy industrial vacuuming with cyclonic separators to eliminate coarse sand and sawdust before wet works commence.
- Adhesive & Protective Film Removal: Peeling manufacturer transit films from aluminum composite panels (ACP), PVC window frames, and sanitary ware before sunlight cures the adhesive into the substrates.
02. Phase Two: Deep Detailing & Chemical Decontamination
This phase constitutes the core technical operation. It requires specialized chemical knowledge to avoid irreversible asset damage:
Tile & Grout Haze Neutralization
Cementitious grout leaves a micro-thin alkaline haze on porcelain and ceramic tiles. Utilizing a calibrated organic acid wash removes this film without corroding the cement joint or discoloring adjacent natural stones.
Tempered Architectural Glass Care
Construction glass frequently accumulates stucco, mortar splashes, and silicone. Never use uncalibrated razor scrapers on tempered glass due to microscopic microscopic fines that cause scratches. Notable employs safety brass scrapers and silicone emulsifiers.
03. Phase Three: Handover & Airborne Particulate Scrubbing
Even after all surfaces look spotless, airborne gypsum and silica particulates continue to settle for 48 to 72 hours. Our handover protocol includes:
- HVAC Return & Diffuser Scrubbing: Wiping down air conditioning diffusers, ventilation grilles, and exhaust ducts to prevent dust recirculation once mechanical systems turn on.
- Cabinet & Millwork Interiors: Detailed wiping of drawer glides, wardrobe tops, hinge wells, and hidden architectural recesses where fine dust collects.
- Anti-Static Neutralization: Application of anti-static micro-fiber sweeps over glossy surfaces to prevent immediate dust re-adhesion before the official client walkthrough.
Need a Post-Construction Site Assessment in Kenya?
Notable Cleaning Services deploys experienced post-construction teams equipped with industrial scrubbers, HEPA extractors, and certified scaffolding teams across Nairobi and nationwide.
Request Site Inspection